ELSTER
 |
040 Series Field regulatorField Regulator, inlet pressure 69 bar, nominal diameter 1”
|
 |
1800B2 Series Pressure RegulatorsThe 1800B2 Series pressure regulators are designed for natural gas applications. This series is ideal for light commercial and industrial use.
|
 |
1800CPB2 Series Regulators1800CPB2 series pressure regulators for natural gas applications
|
 |
3000 Series Regulators3000 industrial regulator for distribution, commercial and industrial applications
|
 |
60DJ, 80DJ & 150DJAppliance and pilot gas regulator 1/4”, 3/8” & 1/2”. Inlet pressure up to 350 mbar
|
 |
Absolut-ENCODER AE2Absolute ENCODER index for diaphragm gas meters with opto-electronic readout and digital transfer of the meter reading
|
 |
Absolut-ENCODER MI-2Absolute ENCODER index for turbine gas meters SM-RI-X and SM-RI-2, optoelectronically scanned and digital read out.
|
 |
Absolut-ENCODER S1Absolute ENCODER index for turbine gas meters TRZ2, optoelectronically scanned and digital read out.
|
 |
Absolut-ENCODER S1DAbsolute ENCODER index for rotary gas meters RVG, IRM-1 and IRM-3 DUO, optoelectronically scanned and digital read out.
|
 |
ACM communication modulesThe communication modules ACM are suitable for fitting to the Absolute ENCODER AE2 and allow for cable-based or wireless data transfer.
|
 |
Analyser cabinetsComplete analyser systems built in a cabinet, suitable for outdoor use
|
 |
Analyser skidsComplete analyser systems built on a metal frame for indoor use.
|
 |
Axial Flow ValveAxial Flow Valve for pressure regulation, over pressure relief, flow control or act as an on/off valve
|
 |
Biogas grid injection systemsProcess gas chromatograph for biogas including H2 and O2 analysis
|
 |
BK-G1.6 – BK-G6These meters are available in co-axial or two-pipe versions
|
 |
BK-G10 – BK-G25These compact meters are available in co-axial or two-pipe versions with a pressed steel housing
|
 |
BK-G40, BK-G65, BK-G100The BK-G40 K to BK-G100 meters are available in co-axial and two-pipe versions
|
 |
CheckSonic-vxMulti-path ultrasonic gas meter for upstream and shale gas measurements and for use in harsh environments
|
 |
ChekkerCheck of manually read out data from domestic meters, using a two-digit, coded number
|
 |
DL210Electronic data logger with Encoder interface and integrated GSM/GPRS modem
|
|
DL220Electronical 2-channel data logger with integrated GSM modem
|
 |
DL230Multi-channel data logger with two encoder interfaces, two digital outputs and integrated GSM/GPRS modem
|
 |
DL240Electronical 4-channel data logger with communication module
|
 |
EK220Universal volume conversion device with an integrated flexible data logger and a configurable interface for billing as well as monitoring purposes
|
 |
EK260Universal volume conversion device with integrated data logger for 9 month and Absolute ECODER functionality
|
 |
EK280Universal volume conversion device with optional integrated GSM / GPRS modem and configurable interface for volume conversion, billing and system monitoring
|
 |
EM260Industrial modem for use in non-hazardous areas with difficult ambient conditions
|
 |
EnCal 3000Process gas chromatograph using latest MEMS technology
|
 |
EnCal 3000 analyser – near total-sulphurProcess-Gas-Chromatograph for near total-sulphur analysis
|
 |
EnCal 3000 BiogasProcess-Gas-Chromatograph for biogas including H2 and O2 analysis
|
 |
EnCal 3000 controllerControl unit for EnCal 3000 GC for installation in safe areas
|
 |
EnCal 3000 H2SProcess gas chromatograph for H2S analysis. H2S may be measured as single component or in combination with calorific value analysis.
|
 |
EnCal 3000 HCDPProcess gas chromatograph for analysis up to C9 and calculation of the hydrocarbon dew point
|
 |
EnCal 3000 THTProcess gas chromatograph for analysing the odorant THT (tetrahydrothiophene). THT can be measured in combination with calorific value analysis or as a single component.
|
 |
enCore FC1High performance flow computer with a modular software approach
|
 |
enSuiteSoftware for parameterization and maintenance of new Elster meters, such as the EK280 volume converter, flow computer FC1 and ultrasonic meter Q.Sonic-plus.
|
 |
ExMFE SimulatorSmart simulation board for flow computer verification
|
 |
FE260Function Extension Unit, Ex-Barrier, Data Communication and Power Supply for Volume Converters
|
 |
FiltersFilters for protecting meters, regulators and downstream gas equipment
|
 |
gas-lab Q1Gas quality analyser based on infrared absorption measurements
|
 |
gas-net C1Protocol gateway with up to 3 serial interfaces and TCP/IP functionality
|
 |
gas-net C2Protocol gateway with up to 6 serial interfaces and TCP/IP functionality
|
 |
gas-net D1Stand-alone DSfG-RDT unit
|
 |
gas-net F1Electronic energy flowcomputer with integrated data logger, data transfer unit and DSfG interface
|
 |
gas-net M1Electronic station control system with DSfG interface
|
 |
GAS-WORKSProgram system for parameterization, read-out and evaluation of station computers F1 and M1
|
 |
HRService regulators for use with several meters in different consumption units
|
 |
IN-Z61IN-Z61 is a retro-fittable Low Frequency (LF) pulser for all Elster-Instromet diaphragm gas meters BK-G1.6 to BK-G100
|
 |
IRM-1IRM-1 is a rotary positive displacement gas meter with separate measuring cartridge for minimum interaction with installation conditions
|
 |
IRM-3 DUOThe IRM-3 DUO is a very robust, compact rotary piston meter with quadratic piston shape and aluminium housing
|
 |
J120Low pressure cut off valve, 3/4” and 1”. Auto or manual reset
|
 |
J123Medium pressure regulator for distribution, commercial and industrial use. Inlet pressure up to 4 bar
|
 |
J123HPM.P. regulator for distribution, commercial and industrial use. Inlet pressure up to 4 bar, outlet pressure up to 1035 mbar.
|
 |
J125Medium pressure service regulator. Available with OPSS/UPSS and relief valve. Inlet pressure up to 8.6 bar
|
 |
J125BMedium pressure balanced service regulator. Available with OPSS/UPSS and relief valve. Inlet pressure up to 8.6 bar
|
 |
J42Low pressure meter service regulator for use in domestic installations
|
 |
J48 (2 1/2 up to 6 inch size)Outlet pressures from 2″ W.C. up to 64″ W.C. Operating temperature range is -4 0F to +158 0F (-20 0C to + 70 0C) with a maximum allowable pressure of 5 PSIG (350 mbar). Flow rates up to 28040 SCFH (800 SCMH).
|
 |
J48 (up to 2 inch size)Outlet pressures from 2″ W.C. up to 64″ W.C. Operating temperature range is -4 0F to +158 0F (-20 0C to + 70 0C) with a maximum allowable pressure of 5 PSIG (350 mbar). Flow rates up to 28040 SCFH (800 SCMH).
|
 |
J48KPressure relief valve 1” & 2”. Relief pressure up to 150 mbar
|
 |
J78Gas regulator 1/2”, 3/4”, 1”. Inlet pressure up to 350 mbar
|
 |
J90Gas Regulator 1 1/4”, 2” & 3”. Inlet pressure up to 350 mbar
|
 |
M2RTwo-stage regulator with a wide variety of connections
|
 |
MAFMedium-pressure co-axial connection regulators for domestic, commercial and industrial use
|
 |
Mobile test installation MTI |
 |
Model 2000Electronic flow computer covering various standards with large storage capacity
|
 |
MRMedium-pressure regulators available in flanged and threaded versions for domestic, commercial or industrial use
|
 |
MR HP20ANSI 150 regulator with high flow rate
|
 |
MR PN 10Series MR PN 10 with flange connection for commercial and industrial supply
|
 |
NDAFSeries of co-axial service regulators for use with several smaller units
|
 |
Q – QuantometerShort pattern turbine gas meter for industrial measurement
|
 |
Q.SonicUltrasonic gas meter with patented reflexion pathes for highest accuracy
|
 |
Q.Sonic-plusOur new multipath custody transfer standard
|
 |
Q75 – QuantometerShort pattern turbine gas meter for pipes up to DN 750 / 30″
|
 |
QA / QAe – QuantometerShort pattern turbine meter with aluminium housing for industrial applications
|
 |
RABO G16 – G250RABO combines tried-and-tested product features of previous rotary gas meters from Elster-Instromet and is a convincing product because it offers a large range of future-oriented features.
|
 |
RVG G16 – G400Compact rotary gas meters in aluminium or ductile cast iron housing for pressure rates PN 16 / ANSI 150
|
 |
RVG-ST G10-G25Robust compact rotary gas meters for screwed or flange connection in aluminium housing
|
 |
S100Over pressure slam shut valve. 2”, 3” and 4” sizes
|
 |
S200Over pressure and under pressure slam shut valve. 2”, 3” and 4” sizes
|
 |
S300In-line over pressure slam shut valve ВС 3/4” and 1” sizes
|
 |
SilencerSilencer for efficient noise reduction
|
 |
SM-RI-2Turbine gas meter DN200 – 600 with extended flow capacity and minimized pressure drop
|
 |
SM-RI-XTurbine gas meter DN50 – 600 with extended configuration, also available as special version for High-Temperature application and the measurement of ethylene gas.
|
 |
Smart ValveThe in the diaphragm gas meter integrated valve allows remote switching of gas supply.
|
 |
Supervisory Suite ISS |
 |
Test-Rigs |
 |
themis-alphaElectronic index with integrated data logging function for all Elster diaphragm gas meters in domestic, commercial and industrial applications
|
 |
themis-logElectronic index with integrated data logging function and pulse output for Elster diaphragm gas meters in commercial and industrial applications.
|
 |
themis-plusElectronic index with integrated volume conversion function and pulse output for Elster diaphragm gas meters in commercial and industrial applications.
|
 |
TRZ2Turbine gas meter DN50 – 150, worldwide recognized as standard in high pressure flow metering
|
 |
TurbinScopeThe Elster “TurbinScope” represents a diagnostic-tool for turbine gas meters, while they are in operation.
|
 |
WinLOOKEasy to handle software for visualisation and export of read-out archives of LIS200 devices
|
 |
WinPADSSoftware for simple parameterization and read-out of volume converters and data loggers
|
 |
ZRHSeries ZRH of meter service governors for use with high-performance two-pipe gas meters
|
ELSTER AMERICAN METER
Elster has strategically reorganized its main business units under the Elster Group to better serve the gas and water markets. The primary units now include:
- Elster American Meter: Focused on meter solutions for the U.S. market, providing reliable metering for gas distribution.
- Elster Perfection: Specializes in connection solutions for gas distribution, offering products designed for safe, long-lasting installations.
- Elster Meter Services: Provides a range of services, including meter testing, installation, and maintenance, to ensure optimal meter performance.
- Elster Canadian Meter: Tailors metering solutions specifically for the Canadian market.
This restructuring enables Elster to enhance its reach and growth within these sectors, aiming for sustainable development and an increased share in the global gas and water industries.
What services does INEQ TRADE provide?
We offer selection, sale and implementation of equipment for power distribution, automatic process control systems, as well as control and measuring instruments for industrial enterprises.
What industries does your company work with?
We serve enterprises in the metallurgical, chemical, pulp and paper, light industries, as well as the fuel and energy complex.
In which countries do INEQ TRADE specialists work?
We serve clients from Europe, the Baltics, the USA, and Asia.
What equipment does the company offer?
We offer a wide range of equipment from well-known manufacturers: sensors and converters, flow meters, electric drives, valves, frequency converters, industrial controllers, cable products and much more.
Can you help me choose the equipment?
Yes, our INEQ TRADE specialists are ready to provide qualified advice on choosing equipment for your tasks and budget.
Does the company work with specific brands or manufacturers?
We offer equipment from brands such as Balluff, Festo, IFM, SEW Eurodrive, ABB, Omron and many others. But we can also supply equipment from other manufacturers from Europe, the USA and Canada.
What payment and delivery terms do you offer?
We provide flexible payment terms and can arrange delivery upon agreement with the client. For more information, please contact our manager.
Is it possible to get discounts on products?
We work directly with manufacturers, so we can offer equipment at prices with significant discounts, which helps customers optimize costs.
How can I get technical or commercial advice?
For consultation, contact us via the website or by phone. Our INEQ TRADE specialists will help you with the selection of equipment or answer questions on commercial terms.