METAL WORK

• Air motors, according to ISO 6432 – single and double acting, with magnetic alarm status and regulation of bilateral depreciation extreme positions. Piston diameter of 8 – 25 mm.
• A series of air motors RNDC – with piston diameter of 32 – 50 mm, single / double acting, with two-way regulation depreciation extreme positions.
• A series of miniature air motors CRTC – single-acting piston diameter 6 – 10 – 16 mm and a sealing ring mounted in the machine frame.
• Series SSCY – single – and double-acting, magnetic alarm status, with through piston rod, protection against rotation.
• A series of compact cylinders CMPC – sided piston rod, a two – and one-way, with protection from the rotation and the magnetic alarm status.
• Hindering air motors – single and double acting.
• Pneumatic cylinders, in accordance with ISO 6431, type A – a two-way regulation depreciation extreme positions, one – and two-way action, the magnetic alarm provisions.
• Pneumatic cylinders, according to ISO 6431 – with a magnetic alarm provisions of bilateral regulation of depreciation extreme positions, one – and two-way action.
• Pneumoengines compact design – point or a moving performance, stride length 10 – 100 mm, diameter 16 – 100 mm.
• Pneumoengines series Rodless – magnetic alarm status, double-acting mechanical compression.
• Dual air motors Rodless – double direction, diameter 16 – 32 mm, with a step length of 100 – 5,700 mm.
• Rodless – air motors are designed for large loads – with a magnetic alarm status, double-acting.

• Pneumoengines double rod Series TWNC – single or double piston rod, double-acting.
• The wires to the air motor: a series of GDS – for large loads and speeds; series GDH – for large loads, for high speeds – GDM.
• Blocks: air motor and valve – pneumatic motor, according to ISO 6431, type A (compact) and a series of valves 70 1/8 – 1/4 – 1/2, Mach 11, Mach 16, ISO 5599.
• Series BRK (mechanical blockage) – for pneumatic cylinders, according to ISO 6431 and ISO 6432, air.
• Hydraulic shock absorbers with a throttle valve, stop valve, check valve for air motors with ISO 6431.

• Two-shoe grips with the uniform position of pads, series P1; holding power pads 8 – 35 N (6 bar).
• Hooks Series P2 – Two-shoe seizures, uniform position pad, holding power 5,3 – 180 bar (at 6 bar).
• P3 – Two-shoe grips with even holding the pad, holding power 50 – 750 N (6 bar pressure).
• Hooks Series P4 – Two-shoe grips, long stride and even hold pads. 28 – 260 H – holding power pad at a pressure of 6 bar.
• Two-shoe grippers, the angular position of pads, the series P6; pad holding force in the range of 15 to 70 N (6 bar).
• Hooks Two-shoe, Series P7, with the angular position of the pads. Holding power pad 30 – 225 N, the pressure of 6 bar.
• Series P8 – polymeric Two-shoe, Shoe and Glove hold holding force 20 – 70 N (6 bar).
• Two-shoe grippers series P10, with the angular position of the pads and the possibility of putting the angle raszhimaniya. The retention force klodok from 32 to 275 N (6 bar).
• Series P11 – trehkolodochnye seizures, uniform position pad, holding power 58 – 1500 N (6 bar).

• Series R1 – rotary air motors, gear assembly, rotation angles of 90, 180, 270 and 360.
• Series R2 – mechanical regulation step, double rack-wheel drive. Rotation angles – 90 or 180.
• R3 – a series of drives with double piston with rack-wheel.

• Series S7, with the guide of high load.
• S8 – series of linear units with double acting engine.
• Series S10 – with the engine double-acting hydraulic damping and reguliruemyoe limiting step.
• Pneumoengines TWIN, Series S11 – double acting hydraulic damping and limiting step.
• Pneumoengines TWIN, Series S12 – double acting hydraulic damping and limiting step.

• Series VME1 – miniklapany, type 3/2.
• Valve series PEV, pedal, type 3/2, 5/2
• Manually operated valves, Series 70, Type 3/2, 5/2, 5/3.
• Mechanically operated valves, Series 70, Type 3/2.
• Valves with pneumatic and electric control, series 70, type 3/2, 5/2, 5/3.
• Series NAMUR – valves with electric and pneumatic control, type 4/2, 5/2.
• MACH series of valves 18, pneumatically and electrically operated, type 5/2, 5/3.
• Valves with electric and pneumatic control, MACH Series 11 type 5/2, 5/3.
• MACH Series 16 – valves with pneumatic and electric control, type 5/2, 5/3.
• Valve for valves series MACH 16 (maximum controlled coil – 16) with a degree of protection – IP65.
• Plates for valves type 70 (1/8 and 1/4), the installation is done on the plates: Mach 18, VDMA, ISO 5599 – 1 and 2, Mach 11, Mach 16.
• Pressure reducing valves, a series of RMV, connection: Input / Output – 1/8.
• PIV.P 10 mm – a series of valves with electric control, type 3/2.
• PIV.M 15 mm – a series of valves with electric control, type 3/2.
• Series PIV – electrically operated valves, mounting plates, type 3/2.

• Valve MM MULTIMACH valves, type 3/2, 5/2, 5/3.
• Valve island HDM HEAVY DUTY MULTIMACH, type 3/2, 5/2, 5/3.
• Valve Island Series CM CLEVER MULTIMACH, type 3/2, 5/2, 5/3.

• Modules for highway MULTIMACH, type Profibus-DP, Interbus-S, Device-net, CAN-open.
• Trunk module for MACH 16, the type of Profibus-DP and Interbus-S.
• Trunk Modules IP 20, type Profibus DP and Interbus S.
• Filters Skillair.
• Pressure reducing valves Skillair.
• Successive reduction valves.
• Precise pressure reducing valves.
• Pressure reducing valves Pilot operated.
• Pressure reducing valves Skilltronic.
• Pressure reducing valves with filter Skillair, filtration precision: 5 – 20 – 50 microns.
• Oiler Skillair, type of lubrication – oil mist.
• Exact filters Skillair – Depurator, with an accuracy of 0.01 micron filtration and purity of 99.97%.
• Comes with manual valves, pneumatic and electric control.
• Valves slow start Skillair, electric and pneumatic control.
• Valves slow start Skillair, with manual, pneumatic and electric control.
• Pneumatic relay Skillair.
• Distribution Modules Skillair.
• Panel cookers Skillair, series 100, 200, 300, two-and three-position.
• Air preparation kits, combinations FRL; FR + L; V3V + FRL; V3V + FR + L; F + L; F + D.

• Filters BIT, precision cleaning 5 – 20 – 50 microns.
• Pressure reducing valves BIT, with connecting thread 1/8 – 1/4.
• Oiler BIT, type of grease – oil mist.
• Pressure relief valves, filters with BIT, with precision filtration 5 – 20 – 50 microns.
• BIT – Depurator – precise filters, filter 5 micron accuracy and degree of purification – 99.97%.
• Distribution Modules BIT – front thread of connection – fourth, carving out connection – eighth.
• Sets the elements of air preparation:
• Combinations: FRL; FR + L; F + L; F + D.

• Filters New deal, with precision filtration of 4 – 20 – 50 microns.
• Pressure reducing valves New deal.
• Pressure reducing valves New deal, pilot control.
• Pressure reducing valves Newtronic, the output pressure of 0.3 – 7 bar inlet pressure 1 – 8 bar.
• The accompanying valves New deal, with manual control.
• Pressure reducing valves with precision filter 4 – 20 – 50 microns, New deal.
• Oiler New deal, the type of lubricant – oil mist.
• Exact filters New deal – Depurator, with an accuracy of 0.01 microns cleaning and purity of 99.97%.
• The accompanying valves New deal, with manual control.
• The accompanying valves New deal, with electric control.
• Distribution Modules New deal.
• Nutritious Plate New deal, the two – and three-position.
• Automatic ejectors condensate New deal
• Sets of air preparation, precision filtration 5 – 20 microns, a combination of: FRL; FR + L; V3V + FRL; V3V + FR + L; F + L; F + D.

• Plug connectors screwed M3, M5, M7, 1/8, 1/4, 3/8, 1/2.
• Polymeric Plugs, attach M5, M7, M12 x 1,5; 1/8, 1/4, 3/8 “
• A series of connectors, threaded connection M5 M7, 1/8, 1/4, 3/8, 1/2.
• Series B – connectors, threaded connection 1/8, 1/4, 3/8, 1/2.
• Connectors Series C, with addition of M5, M6, M12 x 1.5, 1/8, 1/4, 3/8, 1/2.
• A series of connectors, rezboy connection M12 x 1.5, 1/8, 1/4, 3/8, 1/2.
• Series Connectors IAC, the threaded connection 1/8, 1/4, 3/8, 1/2.
• Series connectors ICS, with or without the supplied enclosing the valve and threaded 1/8, 1/4
• Microcontroller transmission series MRF N, threaded connection M5, 1/8, 1/4, 3/8, 1/2.
• About MRF – microcontroller transmission version – throttle, choke – check valve.
• Microcontroller transmission RFL (conductive) versions – throttle, choke – check valve.
• Rapid descent valves, Series VSR, threaded connection 1/8, 1/4, 1/2.
• Valve Series STP, version – run back – throttle, pilot operated check valves.
• Series VCS – spool-off valves, threaded connection 1/8, 1/4, 3/8, 1/2.
• Series VOR – alternative valves with connection thread 1/8, 1/4.
• Check valves Series VNR, connection 1/8, 1/4 (F).
• Logic valves, type: AND, OR, NOT, YES, Memory.
• Connection lines, with one-sided output, with opposite outputs, with the connection.
• Rotary connectors with a single compound plurality of outputs, two or three exits.
• Pneumo – Booth (s) and pass FRL air.
• Pneumatic relay, with the accession of G1 / 8.

• Plastic connectors Series lineonline, assembly line. A large number of varieties, pneumatically symbol on the body with a comfortable reception systems.
• Regulators transmission, a series of RFL R, Version: throttle – the reverse, throttle valves.
• Series RML and RMC – mikroreduktsionnye valves, performance: chuck diameter – the diameter, the diameter – thread.
• Series MAN L – pressure gauges, thread connection 1/8, 1/4, 3/8.
• Series check valves VNR L, with threaded fitting 1/8, 1/4, 3/8.
• Valves rapid descent series VSR L, threaded connection 1/8, 1/4, 3/8.
• Series enclosing the valve V2V L and V3V L, connecting thread 1/8, 1/4, 3/8.
• Gauges, Series LAM L, threaded connection – 1/8, 1/4, 3/8.
• A series of electric valve SOV L, threaded – 1/8, 1/4, 3/8.